The brake controller install harness part # 3050-P that you referenced is the correct harness for installing a Tekonsha brake controller in your 2016 Nissan NV 3500 that has a factory 7-way.
The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and... view full answer...
With the Rhino Rack Pioneer Platform Rack part # RR73QX that fits your 2020 Nissan NV 3500 you can basically attach any roof mounted accessory that is designed to attach to the top channel of a crossbar to it but also there is the crossbar attachments part # RR43138B which can give you a traditional set of bars as well. For a kayak carrier you could use the Thule # TH834 as well. view full answer...
To install the Prodigy P3 part # 90195 in your 2016 Nissan NV 3500 only requires the correct brake controller install harness. For that you'd want the part # 3050-P as it is a confirmed fit for your vehicle.
The vehicle harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. view full answer...
Draw-Tite trailer hitch # 75715 fits all models of the 2016 Nissan NV 3500 passenger or cargo vans so I recommend it. I have included a link to the installation instructions and a link to a video showing an example installation for you.
The trailer wiring harness # 118553 also fits all models. I have linked a video showing an example installation of the wiring harness as well. It will need to be installed first to add a 7-Way using # ETBC7. I have included some links that show and explain... view full answer...
I do have an option to add wiring to your 2015 Nissan NV350, but as this vehicle was never offered in the US market, it will not be plug and play. With that said, you will want the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This includes everything you need, so you do not actually need to cut any of the wires on your vehicle. This is a powered unit though, so you will need to run a wire up to the batter, but this... view full answer...
Yes for your 2014 Jayco Whitehawk 28DSBH that has a dry tongue weight of 640 lbs the Blue Ox weight distribution system # BLU47FR would be perfect as it has as tongue weight range of 600-800 lbs. view full answer...
You'll have to match the jets with the elevation you plan to use the etrailer generator part # 333-0004 in. If there was one jet kit that would work in higher and lower elevations we would have installed it in the generator, but the reality is that with elevation changes there is also a large change in air density so you have to have the correct jets to allow the engine of the generator to function properly. At higher altitudes the air is thinner so you need jets that allow more air into... view full answer...
The Equal-i-zer Weight Distribution Systems like part # EQ37101ET are actually offered without the shank for situations where more drop is needed. These can then be paired with our drop shanks like the Equal-i-zer Weight Dist Shank part # EQ90-02-4200 for up to 4" of drop.
I have attached our list of shanks and systems below. view full answer...
There is not a direct replacement for the LP7000 actuator for disc brakes, and to answer your question, electric over hydraulic braking is better in really every single way. While hydraulic brakes give better stopping power than electric brakes, electric brakes are more responsive, so what an EOH actuator does is combine the two, giving you the best possible stopping power. So I always recommend going electric over hydraulic if possible, and for disc brakes you can use the following:
-... view full answer...
I'd recommend the Draw-Tite Class IV hitch, part # 75715. The hitch has a 7500 lb towing/1125 lb tongue weight capacity. If you're looking for a higher capacity Class IV hitch, go with the Curt Class IV hitch, # C14000. This hitch has a 10,000 lb towing/1000 lb tongue weight capacity, although you'll be limited by the towing capacity of the van if it's lower than the capacity of the hitch.
You might also need the following to complete your towing system:
Trailer wiring harness, part #... view full answer...
We do have what you need here.
For your 2016 Nissan NV 3500, the Roadmaster Base Plate is the Direct-Connect, part # RM-52359-5.
The tow bar compatible with this that I recommend is the Falcon 2, part # RM-520. This tow bar will connect into your 2021 Nexus Ghost International Chassis' hitch receiver. I've linked to a video review of this tow bar for you to look at. *Edit - The 2016 Nissan NV 3500 is 7000 pounds, so the Falcon 2 will not be able to support it. The proper tow bar is the... view full answer...
For optimum ride quality when towing and not towing your best option is something you may have already actually. A properly rated weight distribution system that is set up properly will give you the best support quality when towing and then when not towing the ride quality wouldn't be affected since system isn't hooked up.
Using a Timbren or Sumospring would add more support but shouldn't be necessary unless you have a WD system that just isn't properly rated or set up. You can add either... view full answer...
To install a brake controller in your 2013 Nissan NV 3500 with a factory 7-way you only need the two things you mentioned. You need an install harness and a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate... view full answer...
The correct brake controller install harness you need is the # 3050-P which is a confirmed fit for your 2015 Nissan NV 3500 and for your Tekonsha PowerTrac # 39523. view full answer...
Since you installed the 4-way # 118553 on your 2013 Nissan NV 3500 what you need to install a brake controller is the part # ETBC7 and not the part # 3050-P which you referenced.
The # ETBC7 comes with everything needed to convert the 4-way to a 7-way and also wire up the brake controller.
Had your vehicle had a factory 7-way you would instead have used the part # 3050-P. view full answer...
When their tire chains are installed on a vehicle, Thule does not recommend driving above 50kph, which is about 30mph.
For more information about tire chains, check out the FAQ articles I've linked for you. view full answer...
The best suspension enhancement kit for your 2012 Nissan NV 3500 is going to be the RoadActive Suspension kit part # RAS3614-T once you get your suspension replaced. This will give you the best support, stability, and unlike other enhancement options it improves your ride quality. view full answer...
Since your tow vehicle uses combined trailer wiring you'll need to install a signal converter on the camper so that you can get the stop/turn circuits separated out like you need. For that you'd want the part # 118158 and you'd be set. You'd want to install this on the camper's wiring since it is the factor in the equation that uses a non-standard setup. view full answer...
Go To Results